FAQ c30

Frequently asked question
Bluarmor : C30 - C30 Helmet Communication Device
RIDEGRIDTM is an advanced rider communication system that connects multiple devices at the same time over a mesh and offers a long range. This makes it ideal for rider-to-rider and group communication. Mesh intercom is the future of intercom connectivity between riders due to its large group size, ability to dynamically reform, and coexist with music and phone calls.
RIDELYNKTM is a Universal Bluetooth Intercom connection between two devices and offers a usable range of ~ 50m making it ideal for a rider and pillion connection. You can connect to a non-BluArmor device over a RIDELYNKTM connection
The C30 supports Universal Bluetooth Intercom and can connect to any other headset that supports Universal Pairing. This connection is achieved over RIDELYNKTM, and the maximum range is ~ 50m, making it ideal for Rider-Pillion connection.
It is also possible to latch on a different Bluetooth device on to a RIDEGRIDTM mesh by establishing a RIDELYNKTM connection with that device, and then merging the RIDELYNKTM call on to an existing RIDEGRIDTM mesh.
The C30 features two ports. The microUSB port is used for audio – the headset cable comes with a safety-lock mechanism that ensures that the cable is held in place while riding. The Type-C port meanwhile is covered by a rubber flap and used to charge the device, using the Type-C cable provided in the box.
Unlike some headsets available today, the C30 is IP67 rated and is hence fully waterproof and dust proof over an extended time of use.
The C30 offers RIDEGRIDTM, our proprietary mesh technology and offers up to 1.1km of true range in a straight line. The range is measured on an open highway with line-of-sight (LOS) between the two C30 devices.
Yes, the RIDEGRIDTM mesh connection is stable around Ghat sections and corners with a reduced maximum range.
No, RIDEGRIDTM communication doesn’t get hampered by altitude, our riders have tested the units on the highest motorable road in the world.
To reboot the device press the down, centre and + and - buttons together.
To revert the C30 back to the factory settings, long-press the + & - Buttons for 10 secs.
C30 is continuously updated with newer and better features. These improvements are easily updated Over-the-Air (OTA) via the app itself and you don’t need any cables or additional docks or devices. Check the app to see if you need an update. You will see an alert on the main dashboard if your device requires one. Use the app to follow the steps as mentioned, ensure your device is at least 50% charged before you start the update and don’t turn off the device during the process. The app will indicate the progress status.
The C30 takes 1 hour to charge from 10% to 90% and 1hour 40 minutes to charge from 0% to 100%. 15 minutes of charging will give you 2 hours of run-time.
The C30 is proudly designed, developed and manufactured in Bangalore, India.
Yes, the C30 offers a warranty of 1 year against any manufacturing defect but does not cover physical or liquid damage.
The C30 is designed to be installed on any motorcycle helmet. The box comes with a boom mic and two unit mounts (clamp type and sticker type)
The C30 features a 1000 mAh battery and offers 16+hrs of overall usage on a single charge. With RIDEGRIDTM and music on, the battery lasts 16 hrs.
Yes, the C30 supports charge on the go. You can use the C30 and charge it at the same time.
Check out